|   |   |   |   |   |   |   | 

Results 1 to 63 of 63
  1. #1
    Join Date
    Jul 2005
    Location
    Sea Ranch GC, Gualala, CA.
    Posts
    1,278
    Rep Power
    20

    forged blades, who here plays with them?

    forged blades, who here plays with them?
    which set looks the coolest? For me, it would be Titleist 690.MBs.

    also check this out: http://houseofforged.com/urun2.asp?uktg=1&altcat=2
    golf's a relaxing betting game.

  2. #2
    Yes.And the 690s have big heads,and therefore don't look coolest,these on the other hand....................


  3. #3
    Join Date
    Aug 2005
    Location
    London, England
    Posts
    661
    Rep Power
    19
    I'd take the 690MBs over those anyday...

    It's not just the size of the heads, it's the amount of writing on the heads. That Nicklaus one just looks cluttered. The Titleist looks simple & beautiful.

    To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

  4. #4
    Spookily,I own both sets.The 690s are not the prettiest clubs by any stretch,the CG1s are far nicer looking.Each to their own I suppose,but I have always thought the 690s to be quite unnattractive,the heads are huge.but one persons beauty is anothers ugly.I agree,the Muirfields would have looked very special just blank,in fact they did make a set with just 'custom' on the back,nothing else.These were what Nicklaus used to win the 86 Masters.I still they look good enough even with the writing


  5. #5
    Join Date
    Aug 2006
    Location
    Kiskiak
    Posts
    249
    Rep Power
    18
    I played Kro-flites (1-PW) and Golden Bears (3-PW). The GB's sweet spot was about the size of dime and was located off center, in towards the hosel. At one point I could hit the 1i on the KF's. I think about them occasionally, but only occasionally.
    Bertha 2004 Titanium
    Tight lies, 3, 5+, 7+
    Tommy Armour 845s 3-SW

    Adams Golf GT2 Undercut 60 degree lob
    (...the jury is still out on the lob)

    60's Acushnet Bullseye (workhorse)

    Odessey Rossi II putter that only works on Billiard table greens

    Golf is a game where the ball lies poorly, and the players well. --anon.

  6. #6
    Join Date
    Feb 2006
    Location
    Forest City National - London ON.
    Posts
    2,449
    Rep Power
    21
    I played the 690.mb for 2 years, and loved them. I then switched to shovels and loved them at first, but have really grown sick of the look of these bohemiths. My new set of sticks should be here Tuesday. Titleist 690.cb, I decided to go with the cavity this time for a little more help on the stinky ones. They have the same offset, specs and appearance from the top as the MB.s. I will never again stray from classic look forged clubs.

  7. #7
    Join Date
    Jun 2004
    Location
    Bethpage Black
    Posts
    1,797
    Rep Power
    21
    I play Cleveland CG1's, and I love them. Theres nothing like hitting a forged blade on the sweet spot. I also like them for hooking the ball around trees when I hit my ball into them (all too often)
    "You got a choice. You can stop, or you can start."
    "Start?
    "Walkin"
    "Where?"
    "Right back to where you always been... and then stand there... Still... real still... And remember... "

  8. #8
    Join Date
    Jul 2005
    Location
    Tanglewood (Champions)
    Posts
    3,567
    Rep Power
    22
    i really like forged blades (and wish PING made some) but the coolest blades forged or not are the PING S59's (i'm thinking about getting some S59's or i3 blades) but the best forged blades are either the Mizuno MP37's (i think) or the Cleveland TA-1's (gunmetal) are the best forged blades

  9. #9
    Join Date
    Dec 2005
    Location
    Harbour Point, Cork, Ireland
    Posts
    1,714
    Rep Power
    20
    I have Mizuno MP-32's and they're pinseekers in every club when you get used to them. The PW looks fierce round however, that would be my only complaint
    My set:
    Titleist 905T w/ Grafalloy Blue S
    TaylorMade R7 Steel 15*
    Skymax Ice Resolve hybrid 19*
    Mizuno MP-32 4-PW
    Titleist Vokey Raw 50* & 60*
    TaylorMade RAC TP 56*
    Bettinardi BHB1.C
    TaylorMade TP Red
    GUI Handicap: [B]6.0[/B]
    USGA Handicap: [B]1.9[/B]

  10. #10
    Join Date
    Aug 2006
    Location
    Kiskiak
    Posts
    249
    Rep Power
    18
    I think the MP-32 hosels look rather thick and 1020 carbon steel may be a bit soft over time. Prepare to have the grooves reshaped fairly often.

    If you are running blades and don't have the grooves massaged periodically you are using less than perfect clubs... but that goes without saying for most irons.
    Bertha 2004 Titanium
    Tight lies, 3, 5+, 7+
    Tommy Armour 845s 3-SW

    Adams Golf GT2 Undercut 60 degree lob
    (...the jury is still out on the lob)

    60's Acushnet Bullseye (workhorse)

    Odessey Rossi II putter that only works on Billiard table greens

    Golf is a game where the ball lies poorly, and the players well. --anon.

  11. #11
    Yet you can still spin a ball with no brooves at all,in fact,unless you are playing from rough,grooves do little or nothing,they are designed to remove dirt and moisture.Frankly,for most of us,you don't need to get to worked up about grooves,certainly not to a fanatical 'much be razor sharp all the time' sort of thing.I am sure that some guys do diy botch jobs and just do more damage.

  12. #12
    Join Date
    Aug 2006
    Location
    Bloomfield Hills CC
    Posts
    31
    Rep Power
    0
    Gunmetal cg1's and Macgregor V.I.Ps are by far my favorites
    Driver: Cobra F-speed 9.0* UST Proforce v2
    Fairway metal: cleveland 19*, soon to come titleist 904 13*
    Irons: Hogan FTX
    Wedges: Cleveland 588 gunmetal 56* and cg10 52*
    Putter: Scotty studio design 3.5

    "It did what it do" - Rasheed wallace

  13. #13
    Join Date
    Jul 2005
    Location
    Sea Ranch GC, Gualala, CA.
    Posts
    1,278
    Rep Power
    20

    damn fine

    Quote Originally Posted by Macgregor
    Yes.And the 690s have big heads,and therefore don't look coolest,these on the other hand....................

    nice........!

    I had a 690.MB 4-irron in S300...was surprisingly fun..."easy"... to hit with.
    golf's a relaxing betting game.

  14. #14
    Join Date
    Feb 2006
    Location
    Forest City National - London ON.
    Posts
    2,449
    Rep Power
    21
    The 32's aren't cavity backs really. I would say they are a lot closer to a blade than a cavity back. The cut muscle is pretty tiny.

  15. #15
    Join Date
    Jun 2006
    Location
    Northwest Park
    Posts
    200
    Rep Power
    18
    Quote Originally Posted by LyleG
    The 32's aren't cavity backs really. I would say they are a lot closer to a blade than a cavity back. The cut muscle is pretty tiny.
    i think he meant to say mp 30 and mp 60, not mp 32 and mp 60....

    there is no way i would call mp 32 anything but blades.
    Driver- Taylormade R5 Dual Neutral 9.5
    3 wood- Callaway Big Bertha Warbird

    3 iron- Mizuno MP 60
    4-PW-Mizuno MP 30

    Putter- odyssey 2 ball clone

    Wedges- rac satin 52*, callaway forged 56* and taylormade rac satin 60*

    looking for a cobra baffler 2/R hybrid and a taylormade v steel 3 wood/nike sasquatch 3 wood to replace my hard to hit callaway warbird 3 wood

  16. #16
    Join Date
    Jul 2005
    Location
    Tanglewood (Champions)
    Posts
    3,567
    Rep Power
    22
    i dont really think that the 60's are bldes but i dont think of them as cavity backs... i think that there kinda a mix

  17. #17
    Join Date
    Jul 2006
    Location
    Woodcreek Farms
    Posts
    14
    Rep Power
    0
    Snake Eyes FMC-1, 3-pw
    Attached Images Attached Images  
    Last edited by csb52; 09-04-2006 at 05:18 PM.

  18. #18
    Join Date
    Aug 2005
    Location
    Memphis
    Posts
    12
    Rep Power
    0
    I play Mizuno TP-9s. Haven't found anything as buttery soft yet, but I hear the Cleveland CG1s are pretty soft.
    Nike SQ Driver
    Callaway Big Bertha 3 Wood
    Ben Hogan Hybrid
    Mizuno TP-9 3-PW
    Odyssey White Steel 2-ball blade

  19. #19
    Join Date
    May 2005
    Location
    aaaa
    Posts
    80
    Rep Power
    19
    Quote Originally Posted by bethpage caddy
    I play Cleveland CG1's, and I love them. Theres nothing like hitting a forged blade on the sweet spot. I also like them for hooking the ball around trees when I hit my ball into them (all too often)
    CG1's are blades NOT Forged. The CMM material is soft(I play the CG10 Blackpearl) and as I understand, is still cast.

  20. #20
    Join Date
    Sep 2005
    Location
    Belfry
    Posts
    29
    Rep Power
    0
    Currently playing a set of MacGregor M675s plus a VIP forged gap wedge. The 675s are more forgiving but the VIP feels super soft.

    Personally I think that the MacGregor 1025s and VIPs are very underated clubs.

    Would also like to try the new Ping S58s, but I don't think that they are forged.

    Anyhow, each to their own.
    Hard Work Is No Substitute For Ability

  21. #21
    Join Date
    Aug 2006
    Location
    Pebble Beach
    Posts
    34
    Rep Power
    0
    1985 Fluid Feel Wilson Staffs.

    Best? Probably not, but I love the bore through red dot and the clean lines. Oh and they feel great when you flush them.

  22. #22
    Join Date
    Dec 2005
    Location
    Harbour Point, Cork, Ireland
    Posts
    1,714
    Rep Power
    20
    I would call those Snake Eyes a muscleback, not a blade
    My set:
    Titleist 905T w/ Grafalloy Blue S
    TaylorMade R7 Steel 15*
    Skymax Ice Resolve hybrid 19*
    Mizuno MP-32 4-PW
    Titleist Vokey Raw 50* & 60*
    TaylorMade RAC TP 56*
    Bettinardi BHB1.C
    TaylorMade TP Red
    GUI Handicap: [B]6.0[/B]
    USGA Handicap: [B]1.9[/B]

  23. #23
    Join Date
    May 2005
    Location
    Firestone Country Club
    Posts
    227
    Rep Power
    19
    I play KZG forged blades in my short irons, and forged cavities in my mid irons. The feeling is great, and they just look good. And playing in my fair share of wind, being able to hit a lower ball with a blade is a good thing.
    TheRod
    "Fairways and greens, and don't forget to wave."

    Driver: KZG Gemini2 460, 10.5 deg, Graman 540 Limey
    3W-5W: KZG CH-III, shafts vary
    26 deg utility
    6,7 irons: KZG forged cavity IIM, rifle 6.0
    8-PW: KZG forged cavity, rifle 6.0
    GW, SW, LW: Inifiniti
    Putter: Slighter custom

  24. #24
    Join Date
    Feb 2006
    Location
    Forest City National - London ON.
    Posts
    2,449
    Rep Power
    21
    Quote Originally Posted by emc
    I would call those Snake Eyes a muscleback, not a blade

    I would call those snake eyes one of the ugliest clubs I have ever seen.

  25. #25
    Join Date
    Dec 2005
    Location
    273 miles north of Dutch Harbour.
    Posts
    1,633
    Rep Power
    20
    Quote Originally Posted by LyleG
    I would call those snake eyes one of the ugliest clubs I have ever seen.
    I love you, LyleG...you make my fakking day .

    I will be carrying these beasts next year:



    ...aren't they purdy?
    I can't wait for shore leave so I can get me som fukkin' poon-tang.

  26. #26
    Join Date
    Jul 2005
    Location
    Sea Ranch GC, Gualala, CA.
    Posts
    1,278
    Rep Power
    20

    Forged In Japan, KZGs are...

    Quote Originally Posted by Boomhauer

    ...aren't they purdy?
    clean lines, "looks fast"
    even prettier than Titleist 690MBs.

    I like the way my MacGregor 1025s strikes the ball, but to look at, they have bit much decoration: "VIP", "Tourney", and "V-Foil" all on the back side of the head.
    golf's a relaxing betting game.

  27. #27
    Join Date
    Dec 2005
    Location
    273 miles north of Dutch Harbour.
    Posts
    1,633
    Rep Power
    20
    Quote Originally Posted by TheRod
    I play KZG forged blades in my short irons, and forged cavities in my mid irons. The feeling is great, and they just look good. And playing in my fair share of wind, being able to hit a lower ball with a blade is a good thing.

    That's what I am thinking about setting up - hybrid 2 and 3, forged cavity 4, 5, and 6, and forged blade 7 up. I'd like to try the 460 Gemini, but the only makers around here are asking $500 plus - I could buy the 905R for less!
    I can't wait for shore leave so I can get me som fukkin' poon-tang.

  28. #28
    Join Date
    Jul 2005
    Location
    Sea Ranch GC, Gualala, CA.
    Posts
    1,278
    Rep Power
    20

    new KZG Gemini 460

    there's a custome pro club maker that'll build a new KZG Gemini 460 driver fo aroun' $300
    CCCtheBear@aol.com
    golf's a relaxing betting game.

  29. #29
    Join Date
    Feb 2006
    Location
    Forest City National - London ON.
    Posts
    2,449
    Rep Power
    21
    not a blade but no offset and sweet as fuk


  30. #30
    Join Date
    Dec 2005
    Location
    Harbour Point, Cork, Ireland
    Posts
    1,714
    Rep Power
    20
    Trouble in paradise with your Cally's Lyle?
    My set:
    Titleist 905T w/ Grafalloy Blue S
    TaylorMade R7 Steel 15*
    Skymax Ice Resolve hybrid 19*
    Mizuno MP-32 4-PW
    Titleist Vokey Raw 50* & 60*
    TaylorMade RAC TP 56*
    Bettinardi BHB1.C
    TaylorMade TP Red
    GUI Handicap: [B]6.0[/B]
    USGA Handicap: [B]1.9[/B]

  31. #31
    Join Date
    Feb 2006
    Location
    Forest City National - London ON.
    Posts
    2,449
    Rep Power
    21
    Quote Originally Posted by emc
    Trouble in paradise with your Cally's Lyle?
    No trouble, I just got sick of looking at the big ugly bastards. I missed my titty's, so I bought some new ones. These are in the bag for good.

  32. #32
    Join Date
    Aug 2004
    Location
    Bandon Dunes + Pacific Dunes, Spyglass
    Posts
    1,332
    Rep Power
    21
    Famous last words

    I'd always thought the term "muscleback" as a way to more tightly define a blade. A muscleback is surely a blade in every definition of the mechanics involved.
    TM Burner 9.5 - Stiff
    TM R580 3wood - Stiff
    TM TP 22degree Hybrid - Diamana Stiff
    Mizuno MP-60's (3-W) - TT Tour Concept Stiff, 126g
    TM RAC TP 52-08 Satin (Y-cutter baby) - TT Wedge Flex
    TM RAC 56-12 FE2O3 TT Wedge Flex
    Titleist Scotty Cameron Project C.L.N. 1997 Limited Edition Putter - 35"

    Titleist Pro-V1x, Golfbuddy+, lots of game baby but still a 8.1

  33. #33
    Join Date
    Jun 2004
    Location
    Kiawah Island Ocean / DORAL BLUE MONSTER
    Posts
    20
    Rep Power
    0

    Forged blades, who plays? - I play Ben Hogan APEX blades

    I play Ben Hogan APEX blades and love them. They are classic and are the best looking irons I've owned.
    Attached Images Attached Images  
    Last edited by maugust; 09-12-2006 at 07:45 AM.

  34. #34
    Join Date
    Aug 2006
    Posts
    284
    Rep Power
    18
    mizunos mp 32, 33, 37, and the NEW 67's all sweet blades.....
    titleist 690 and 695 mb's....
    cleveland ta1, cg1's
    nike except for the swoosh....i just keep thinking shoes
    hogan apex

    all of them....the titleist are a bit "big" for my taste but i do like them still.....
    Ping 59's are really nice clubs....very lite compared to mizuno and i can generate more clubhead speed with them....super sticks they are....would not mind having them, don't get me wrong my 32s keep me smiling.....especially those short irons....long irons can be tricky to master though.....but workability is outstanding.....

    oh yeah and my favorite blades are the Callaway .............................................????? ?

  35. #35
    Join Date
    Jul 2005
    Location
    Sea Ranch GC, Gualala, CA.
    Posts
    1,278
    Rep Power
    20

    what really is a forged blade, nowadays?

    Quote Originally Posted by Omen
    mizunos mp 32, 33, 37, and the NEW 67's all sweet blades.....
    MP-33s and MP-37s are forged blades.
    MP-32s, MP-60s,and MP-67s are forged cavity backs ("cut-muscle" - if you'd like).
    All are fine clubs: really enjoyed demo-ing them Mizzys.
    MP-60s are exeptionally solid and surprisingly forgiving.

    Ben Hogan Apex Plus, being "players'" cavities, are also fine sticks.
    Apex FTXs are also very good

    I have a Ben Hogan Apex Forged blade 9-iron just for "kicks" I leave it in my pickup just in case I'm near a range, with time to kill....it's a sweet striker.
    If I ever have enough leisure time and talent to play to a single digit Index, I'd definately consider a set of Ben Hogan Apex 50s, right up there with 690.MBs
    golf's a relaxing betting game.

  36. #36
    Join Date
    Aug 2006
    Posts
    284
    Rep Power
    18
    THE END ALL BE ALL OF BLADES.....IMO

    http://www.miuragolf.com/shop_blade.asp


    MIURA.......sweet, except the price.

  37. #37
    Join Date
    Dec 2005
    Location
    Harbour Point, Cork, Ireland
    Posts
    1,714
    Rep Power
    20
    I would classify the 32's and 67's as blades. My definition of cavityback is perimiter weighting.
    My set:
    Titleist 905T w/ Grafalloy Blue S
    TaylorMade R7 Steel 15*
    Skymax Ice Resolve hybrid 19*
    Mizuno MP-32 4-PW
    Titleist Vokey Raw 50* & 60*
    TaylorMade RAC TP 56*
    Bettinardi BHB1.C
    TaylorMade TP Red
    GUI Handicap: [B]6.0[/B]
    USGA Handicap: [B]1.9[/B]

  38. #38
    Join Date
    Dec 2005
    Location
    Harbour Point, Cork, Ireland
    Posts
    1,714
    Rep Power
    20
    Hey Omen, what kind of stupidass clubs are they ;)
    My set:
    Titleist 905T w/ Grafalloy Blue S
    TaylorMade R7 Steel 15*
    Skymax Ice Resolve hybrid 19*
    Mizuno MP-32 4-PW
    Titleist Vokey Raw 50* & 60*
    TaylorMade RAC TP 56*
    Bettinardi BHB1.C
    TaylorMade TP Red
    GUI Handicap: [B]6.0[/B]
    USGA Handicap: [B]1.9[/B]

  39. #39
    Join Date
    Jul 2005
    Location
    Sea Ranch GC, Gualala, CA.
    Posts
    1,278
    Rep Power
    20

    among the finest forgings

    Quote Originally Posted by emc
    Hey Omen, what kind of stupidass clubs are they ;)
    Now with KZG you get American designed and Japan forged, blades or CBs.
    TaylorMade gets their best tour clubs forged by Miura (I think).
    Titleist and Callaway have moved to cheaper "forgeries," pun intended, in China (PRC)..so 690.MBs maybe the last set of Titleist irons that may have been forged in Japan. A local Golfsmith manger and local Titleist Staff pro both told me that they think there's a difference: Japan forgings are better.

    Miuras are fine looking...
    Attached Images Attached Images  
    golf's a relaxing betting game.

  40. #40
    Join Date
    Dec 2005
    Location
    Harbour Point, Cork, Ireland
    Posts
    1,714
    Rep Power
    20
    I was referring to his sig. which is quite close to mine
    My set:
    Titleist 905T w/ Grafalloy Blue S
    TaylorMade R7 Steel 15*
    Skymax Ice Resolve hybrid 19*
    Mizuno MP-32 4-PW
    Titleist Vokey Raw 50* & 60*
    TaylorMade RAC TP 56*
    Bettinardi BHB1.C
    TaylorMade TP Red
    GUI Handicap: [B]6.0[/B]
    USGA Handicap: [B]1.9[/B]

  41. #41
    Join Date
    Mar 2006
    Location
    Harvester In Iowa
    Posts
    128
    Rep Power
    19
    Quote Originally Posted by Boomhauer
    I love you, LyleG...you make my fakking day .

    I will be carrying these beasts next year:



    ...aren't they purdy?
    I have set just like these, When Im sober I can hit them pretty good 5-PW but that 3 & 4 are very small.
    KZG Gemini 460 [COLOR="Red"][/COLOR]
    [COLOR="Blue"][/COLOR]KZG Cobalt 4 & 7 Wood[COLOR="Blue"][/COLOR]
    [COLOR="Red"][/COLOR]KZG Forged Evolution 4-7
    KZG Forged ZO 8-SW[COLOR="Red"][/COLOR]
    [COLOR="Red"][/COLOR]Nomad WRX GTO Hogan 62 K[COLOR="Blue"][/COLOR]
    [COLOR="Red"]Tom Slighter "Kirkland" [/COLOR]
    [COLOR="Blue"]Bridgestone E-5 [/COLOR]
    [COLOR="Red"]Bennington Cart Bag [/COLOR]

  42. #42
    Join Date
    Sep 2005
    Location
    a free one
    Posts
    171
    Rep Power
    19
    Quote Originally Posted by maugust
    I play Ben Hogan APEX blades and love them. They are classic and are the best looking irons I've owned.

    I've also got Ben Hogan APEX blades but there the ones they made in 1988-89. They look really similar. I've played w/ them a few times but they are too punishing for my bad swings to use them all of the time. The lofts are really weak too so judging there distance is a little dicy. That said nothing feels sweeter in the world than puring the 3 iron.

    If you go to the hogan site and look thru the iron history you can see them. Unfortunately I couldn't figure out how to attach a picture.
    Driver: Wilson Staff Dd5 10* S - 44.25"
    (soon to be Adams BUL 10.5* UST Proforce V2 R - 43.50")
    FW: Adams Redline 3 wood 15* S - 42.25"
    Hybrids: Adams Iwood 17*, 21* iron shaft S
    Irons: MacGregor 455M 4-PW R
    GW: Clevland 52* 900 RTG
    SW: Clevland 56* 588 RTG
    Putter: Macgregor M5k

  43. #43
    Join Date
    Dec 2005
    Location
    Harbour Point, Cork, Ireland
    Posts
    1,714
    Rep Power
    20
    Why does anone care where the clubs are made? Doesn't the name 'Titleist' give you enough assurance of a quality club?
    My set:
    Titleist 905T w/ Grafalloy Blue S
    TaylorMade R7 Steel 15*
    Skymax Ice Resolve hybrid 19*
    Mizuno MP-32 4-PW
    Titleist Vokey Raw 50* & 60*
    TaylorMade RAC TP 56*
    Bettinardi BHB1.C
    TaylorMade TP Red
    GUI Handicap: [B]6.0[/B]
    USGA Handicap: [B]1.9[/B]

  44. #44
    Join Date
    Nov 2001
    Location
    Oak Valley
    Posts
    7,980
    Rep Power
    30
    Quote Originally Posted by emc
    Why does anone care where the clubs are made? Doesn't the name 'Titleist' give you enough assurance of a quality club?
    My current iron heads were forged in Thailand by Endo, who is just starting to make their own clubs after being the foundry for many of the top Japanese and US OEM companies. They used to have their foundry in Japan, but have moved to Thailand, obviously for reduced labor costs. They're great clubs. I don't care if they were forged in Antarctica or Paraguay; the people who set up the operation and supervise it obviously know what they are doing.
    The same applies to the automobile industry these days. A "German" or "Japanese car" may be made in the US, and an "American" car may have parts from Canada, Europe, Latin America, or just about anywhere. It's an interlocked world from a business and industrial viewpoint.
    Seldom right, never in doubt......

  45. #45
    Join Date
    Jan 2006
    Location
    The last one I played good at
    Posts
    110
    Rep Power
    19
    Titleist 690 MB.......the absolute best. I have literally worn out a set and am on my 2nd. set. I play alot (3 times per week minimum) and would hit nothing else. I wanted the MP-3somethings (true Mizuno blade) but they are not available in lefty.

    Rifle Project X in 6.0 XS, if your swing can repeat, this is the club for you.

    I sometimes sleep with my 690 MB's right next to me.......Hahahaaaa !

  46. #46
    Join Date
    May 2006
    Location
    Loews Ventana Canyon
    Posts
    6
    Rep Power
    0
    I had asked about the Miura clubs some time ago on this forum but didn't get much of a response. However I finally gave up and ordered a set which I received just 2 weeks ago now. I had them on the range for the first time this week (I kept them new because I was worried I was going to have to sell them right away - my company closed down the day before they arrived, but I have a new job now) and they are absolutely incredible. My Hogan Apex Edge Pros are going into the attic now for a well deserved rest. The Miura blades are the softest feeling, nicest looking clubs around. Very easy to hit too (mine are equipped with precision rifle shafts - 6.0). They really aren't that much more expensive than other clubs, the only trouble is finding a place to get them.

  47. #47
    Join Date
    Jul 2005
    Location
    Sea Ranch GC, Gualala, CA.
    Posts
    1,278
    Rep Power
    20

    Miura Blade

    Quote Originally Posted by SunnyDaze
    I had asked about the Miura clubs some time ago on this forum but didn't get much of a response. However I finally gave up and ordered a set which I received just 2 weeks ago now. I had them on the range for the first time this week (I kept them new because I was worried I was going to have to sell them right away - my company closed down the day before they arrived, but I have a new job now) and they are absolutely incredible. My Hogan Apex Edge Pros are going into the attic now for a well deserved rest. The Miura blades are the softest feeling, nicest looking clubs around. Very easy to hit too (mine are equipped with precision rifle shafts - 6.0). They really aren't that much more expensive than other clubs, the only trouble is finding a place to get them.
    nice, I'm going green with heavymetal desire.... JK.
    I say to myself that I'll celebrate getting to single digit Index (if and when) by buying some nice killer sticks like Miura Forged Blades with Rifles...
    I wonder how they'd compare to KZG Forged ZOs and Titleist 690.MBs.
    All I need is to write a check and my local clubmaker can get 'em for me...but I'll stay cool...
    I will continue to groove my MacGregor 1025Cs...they're looking and working finely.
    golf's a relaxing betting game.

  48. #48
    Join Date
    Aug 2005
    Location
    Memphis
    Posts
    12
    Rep Power
    0
    Quote Originally Posted by Da Blade
    Titleist 690 MB.......the absolute best. I have literally worn out a set and am on my 2nd. set. I play alot (3 times per week minimum) and would hit nothing else. I wanted the MP-3somethings (true Mizuno blade) but they are not available in lefty.

    Rifle Project X in 6.0 XS, if your swing can repeat, this is the club for you.

    I sometimes sleep with my 690 MB's right next to me.......Hahahaaaa !
    The MP-33s. I love those clubs - unfortunately, I'm left-handed too. I am ready to replace my TP-9s but haven't found anything as soft. I hear the Miuras are soft and are available in lefty. Obviously you like the 690s, do you have anything to compare them to? I'd also like to try the Cleveland CG1s.
    Nike SQ Driver
    Callaway Big Bertha 3 Wood
    Ben Hogan Hybrid
    Mizuno TP-9 3-PW
    Odyssey White Steel 2-ball blade

  49. #49
    Join Date
    Jul 2005
    Location
    Sea Ranch GC, Gualala, CA.
    Posts
    1,278
    Rep Power
    20

    MP-33s?

    Quote Originally Posted by chrisgaddy
    The MP-33s. I love those clubs - unfortunately, I'm left-handed too. I am ready to replace my TP-9s but haven't found anything as soft. I hear the Miuras are soft and are available in lefty. Obviously you like the 690s, do you have anything to compare them to? I'd also like to try the Cleveland CG1s.
    MP-33, do they have the more "forgiving" reputation for a forged blade?
    golf's a relaxing betting game.

  50. #50
    Join Date
    Nov 2001
    Location
    Oak Valley
    Posts
    7,980
    Rep Power
    30
    Quote Originally Posted by ironman
    MP-33, do they have the more "forgiving" reputation for a forged blade?
    If you want a relatively forgiving forged blade, consider any of the recent MacGregor offerings, such as the 1025 M or the M675's.
    Seldom right, never in doubt......

  51. #51
    Join Date
    Sep 2004
    Location
    Loomis Trail
    Posts
    229
    Rep Power
    20

    Forged vs Cast

    Why do we all go nuts over these "soft" forged clubs--buttery smooth ,softest feel ever,so sweet etc etc.We've all been there.Yet.....we put (most of us) Cleveland or Volkey wedges in our bags...cast clubs.What gives?

  52. #52
    Join Date
    Dec 2005
    Location
    orchardleigh, uk
    Posts
    260
    Rep Power
    19
    Quote Originally Posted by Guru2
    Why do we all go nuts over these "soft" forged clubs--buttery smooth ,softest feel ever,so sweet etc etc.We've all been there.Yet.....we put (most of us) Cleveland or Volkey wedges in our bags...cast clubs.What gives?

    My Cleveland wedge is forged, nice and soft, im expecting it to rust soon, ive had it for 7 months or so.

    TOM
    "1 PUTTS PREFFERED!"

  53. #53
    Join Date
    May 2005
    Location
    aaaa
    Posts
    80
    Rep Power
    19
    Quote Originally Posted by Guru2
    Why do we all go nuts over these "soft" forged clubs--buttery smooth ,softest feel ever,so sweet etc etc.We've all been there.Yet.....we put (most of us) Cleveland or Volkey wedges in our bags...cast clubs.What gives?
    Casting process has come a very very long way. Also the significant advances in metallurgy has started to find its way into golf equipment as the commercial market size has increased substantially for golf equipment. In fact Cleveland doesnt have a forged line outside of TA line now. Even their high end CG1 Black Pearl line of blades are cast with their CMM technology. I have a CG10 Black Pearl 56 deg & a Tour Action Form forged 52 Deg wedge. Both of them are buttery soft and glide through the ball and I can see no perceptible difference in them in terms of feel.

  54. #54
    Join Date
    Aug 2006
    Posts
    284
    Rep Power
    18
    Quote Originally Posted by emc
    I was referring to his sig. which is quite close to mine
    i think your a hottie..thats why i play the same equipment as you.......that is your picture right???

    im a duffer so i got some primo equipment hoping i could buy some game....you cant so dont try.....but when i play bad and the people see my equipment they think im just having an off day.....yeahya


    Miura blades are it though....I have hit a set...guy at a club i used to be at in texas got some and let me hit them.....soooooo nice when you hit it right.....which of course i do cause im working on my 13th major as we speak....hm hm hmmm.

  55. #55
    Join Date
    Sep 2004
    Location
    Loomis Trail
    Posts
    229
    Rep Power
    20

    Tom P + +to Oto

    Tom P if you are playing Cleveland 900-Form Forged,they are basically cast then stamped, the stamping process resembles a step in the forging process,but not a true forging.I've got one in my bag,I love it.My point is for some of us we have this perception forged clubs are somehow better.I'm sure it's totally a mental thing.

  56. #56
    Join Date
    Aug 2006
    Posts
    25
    Rep Power
    0
    I have talked to several high end club makers, and they all agree that the Miuras are world class forged clubs. They are real easy on the eyes too! KZG's are also double forged in Japan, and represent a ultra high quality club. I have hit the Evolutions and loved them, but I really can't justify buying them as my McGregor 1025 CM's are working very well for me (forgiving & good looking).

    I think that in a year or two, I might take a serious look at the Mizuno MP 60's. They are good looking forged clubs that provide a little "wiggle room" when the swing goes a bit astray.

  57. #57
    Join Date
    Feb 2002
    Posts
    26
    Rep Power
    0
    Just bought a 53deg wedge by Hiro Matsumoto..... so good i went out and got the 57deg sand wedge next day after a round....







    HM don't make an iron set in same style sadly....


    coops

  58. #58
    Join Date
    Sep 2004
    Location
    Loomis Trail
    Posts
    229
    Rep Power
    20

    Nice wedge

    Coops,whats the deal with thoses wedges?Look great. Where do you get them?Are they hand ground?

  59. #59
    Join Date
    Aug 2006
    Location
    Pebble Beach
    Posts
    34
    Rep Power
    0
    Those wedges are sweet.

    But remember, "its the Indian, not the arrow."

  60. #60
    Join Date
    Feb 2002
    Posts
    26
    Rep Power
    0
    Quote Originally Posted by Guru2
    Coops,whats the deal with thoses wedges?Look great. Where do you get them?Are they hand ground?
    They're made in Japan - I live in Thailand where they're easily available, along with Miura gear.....

    Hand ground - i like the unfinished grind marks, and the sharp leading edge grind.

    Really helped my awful short game - maybe the appearance or just the 'new' juice on it gave me some confidence. Will see how long the honeymoon lasts.


    Coops

  61. #61
    Join Date
    Nov 2001
    Location
    Oak Valley
    Posts
    7,980
    Rep Power
    30
    The rough finish and dark colors remind me of some Japanese Zodia wedges I had a few years ago.
    Seldom right, never in doubt......

  62. #62
    Join Date
    Jul 2005
    Location
    Sea Ranch GC, Gualala, CA.
    Posts
    1,278
    Rep Power
    20

    MP-60s, 1025CMs, KZG's, Miura's

    Quote Originally Posted by Pjake
    I have talked to several high end club makers, and they all agree that the Miuras are world class forged clubs. They are real easy on the eyes too! KZG's are also double forged in Japan, and represent a ultra high quality club. I have hit the Evolutions and loved them, but I really can't justify buying them as my McGregor 1025 CM's are working very well for me (forgiving & good looking).

    I think that in a year or two, I might take a serious look at the Mizuno MP 60's. They are good looking forged clubs that provide a little "wiggle room" when the swing goes a bit astray.
    Got good tastes: MP-60s, 1025CMs, KZG's Evo', Miura's.
    golf's a relaxing betting game.

  63. #63
    Join Date
    Aug 2006
    Posts
    25
    Rep Power
    0
    Thanks Ironman.....now if I could only refine my game to the extent I have refined my taste in clubs!

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Forged Blades
    By famousdavis in forum Golf Discussion
    Replies: 90
    Last Post: 10-05-2010, 06:55 PM
  2. forged blades or cast cavities....
    By Omen2 in forum Golf Discussion
    Replies: 52
    Last Post: 12-20-2007, 10:02 AM
  3. Nike Forged Blades
    By cfr_pratt in forum Golf Discussion
    Replies: 3
    Last Post: 06-06-2006, 11:36 AM
  4. Golfsmith Pro Forged Blades
    By bubbha70 in forum Golf Discussion
    Replies: 7
    Last Post: 12-26-2005, 11:01 AM
  5. Who plays blades?
    By BogeyGolf in forum Golf Discussion
    Replies: 71
    Last Post: 09-28-2005, 11:25 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •