|   |   |   |   |   |   |   | 

Results 1 to 54 of 54
  1. #1
    Join Date
    Dec 2001
    Location
    Spyglass
    Posts
    11,184
    Rep Power
    35

    Any blade putter players out there?

    I'm considering the following:

    Ping Tess

    Yes Sophia

    Yes Nicky

    Lynx Blade Putter w/ no offset. Golfsmith $49

    Odyssey Tour Black Blade Putter

    I will not consider Wilson 8802, Macgregor or Palmer putters. The reason is because I don't want to.

  2. #2
    Join Date
    Dec 2004
    Location
    ojai country club
    Posts
    983
    Rep Power
    21
    Forget blades, get a Ray Cook mallet. Billy Casper and Raymond Floyd both won the Masters with them.

  3. #3
    Join Date
    Feb 2010
    Location
    The easiest
    Posts
    6,334
    Rep Power
    22
    Ray Cook Classic Plus II. 8802 look with a sort of dull bronze finish with two large brass circular weights in the sole at the heel and toe. Its original shaft broke and I put a True Temper steel straight shaft on it, cut it to 35", and put a Winn midsize pistol grip on it that is black with gray stripes. The original putter cost around $16 used at the Golf Galaxy which also supplied the putter shaft for about $9 and the grip for around $7. It is a real smooth stick that rolls the ball well and has a bit of loft so I can do the Phil/Stockton forward press on slick surfaces or come through level on lesser surfaces.

  4. #4
    Join Date
    Aug 2008
    Location
    Coto De Caza-- RT Jones
    Posts
    3,224
    Rep Power
    21
    Quote Originally Posted by famousdavis View Post
    I'm considering the following:

    Ping Tess

    Yes Sophia

    Yes Nicky

    Lynx Blade Putter w/ no offset. Golfsmith $49

    Odyssey Tour Black Blade Putter

    I will not consider Wilson 8802, Macgregor or Palmer putters. The reason is because I don't want to.
    For a spash of realism, I suggest you and most here spend the money on lessons. Tell the pro you're ready for blades and that you serious think the type of irons you play will lower your average scores. I suspect the pro will say, "ok, I can help you decide which irons you need, but first, lets see your swing." We both know happens next. 30 minutes later you will NOT be thinking about clubs but about the MAJOR swing changes you need to make and scheduling your next lesson.

    http://www.youtube.com/watch?v=9YsvRfgLP3w

    Here Kevin (the pro you took a lesson from) hits an OLD 1-iron 250 yards to the end of the range.

    My message: "it is not the clubs!"

    Larry
    Last edited by Larryrsf; 02-09-2012 at 05:25 PM.

  5. #5
    Join Date
    Apr 2009
    Location
    Chambers Bay is my favourite (it is not my location)
    Posts
    2,777
    Rep Power
    19
    Quote Originally Posted by Larryrsf View Post
    For a spash of realism, I suggest you and most here spend the money on lessons. Tell the pro you're ready for blades and that you serious think the type of irons you play will lower your average scores. I suspect the pro will say, "ok, I can help you decide which irons you need, but first, lets see your swing." We both know happens next. 30 minutes later you will NOT be thinking about clubs but about the MAJOR swing changes you need to make and scheduling your next lesson.

    http://www.youtube.com/watch?v=9YsvRfgLP3w

    Here Kevin (the pro you took a lesson from) hits an OLD 1-iron 250 yards to the end of the range.

    My message: "it is not the clubs!"
    Larry, you're such a self-absorbed narcissist.

    You're so busy trying to push your agenda that you completely missed that he didn't ask about blade irons. He asked about blade...

    PUTTERS!!!
    TaylorMade r7 9.5°
    TM 200 Steel 3-wood
    TM 3 Hybrid
    Titleist AP2 w/Project X shafts 3-PW
    Cleveland 52°, Titleist Vokey 56° & 60°
    Tommy Armour Model 6 putter.

  6. #6
    Join Date
    Feb 2010
    Location
    The easiest
    Posts
    6,334
    Rep Power
    22
    Quote Originally Posted by 24putts View Post
    Forget blades, get a Ray Cook mallet. Billy Casper and Raymond Floyd both won the Masters with them.
    My other putter is a Ray Cook mallet. The M-1. Nice heavy small head in sort of a U-235 looking finish. I like the name because it reminds me of both one of my favorite rifles and a very good tank. And, best of all, my absolute favorite vehicle of either two or four wheels made by Bavarian Motor Works. I customized my Ray Cook M-1 with an Aldila graphite iron shaft cut to play 33". I filled the shaft with sand and stuck a black and white checked putter grip, pistol grip style, on the end with some lead weight at the butt end of the shaft. It is a short but heavy putter that has some nifty shaft flex. It is my pop-putter for when I feel the need to go Retro in my putting that day a la Bobby Locke and all the big pros who played in the '50's on those slow greens you see on the old TV black and white films of the Masters and Shell Wonderful World of Golf.

  7. #7
    Join Date
    Feb 2008
    Location
    Mystic Hills, Chesapeake Run, Swan Lake, Blackthorn
    Posts
    1,722
    Rep Power
    19
    Quote Originally Posted by famousdavis View Post
    I'm considering the following:

    Ping Tess

    Yes Sophia

    Yes Nicky

    Lynx Blade Putter w/ no offset. Golfsmith $49

    Odyssey Tour Black Blade Putter

    I will not consider Wilson 8802, Macgregor or Palmer putters. The reason is because I don't want to.
    My Sophia came in yesterday. Gorgeous, great weighty feel, and a nice feel. I've just been able to putz around the house with it, but it feels so natural. My hopes are that I can control speed of the putts better on faster greens. I probably paid a bit much 70 delivered, buts it's a mint demo, without a sightline, hard to find like my Tracy II. After playing YES putters I can't stand a Cameron, or any putter that doesn't impart topspin. One of worst putters I used was a Brad Faxon Laguna 2.5 that would fly in there air a few inches and skid a few more, on any putt over 10' foot. I have a Ping Pal I think it's the 4 and the one Ky has, a ram Zebra. Gotta go my ol ladys horny.
    Tm R9 420cc 9.5 Motore Tm R9 3 wood rip phenom, Titleist 909h 19* 24* voodoo, Scratch EZ-1 ds i80,steelfiber 3 or 4. 5-9 KBS, ds 47* jlm, pdg 53* ds 60* Odyssey Black 2 ball tour blade 33.5" Lethal

  8. #8
    Join Date
    Dec 2001
    Location
    Spyglass
    Posts
    11,184
    Rep Power
    35
    Quote Originally Posted by 12sandwich View Post
    My Sophia came in yesterday. Gorgeous, great weighty feel, and a nice feel. I've just been able to putz around the house with it, but it feels so natural. My hopes are that I can control speed of the putts better on faster greens. I probably paid a bit much 70 delivered, buts it's a mint demo, without a sightline, hard to find like my Tracy II. After playing YES putters I can't stand a Cameron, or any putter that doesn't impart topspin. One of worst putters I used was a Brad Faxon Laguna 2.5 that would fly in there air a few inches and skid a few more, on any putt over 10' foot. I have a Ping Pal I think it's the 4 and the one Ky has, a ram Zebra. Gotta go my ol ladys horny.
    I like the Sophia because it has less offset than some of the other true heel-shafted blade putters. I have to admit that I'm leaning toward the Lynx putter at Golfsmith. I has almost no offset-something I like in a blade putter. I was trying a wristy stroke on the practice putting green with it, where I would just pop the ball, and I was making everything.

    Another one I'm considering is the Ping H blade. They say you shouldn't bring a knife to a fight but I'll make an exception with my blade.

  9. #9
    Join Date
    Feb 2004
    Location
    Location, Location.
    Posts
    11,935
    Rep Power
    33
    Quote Originally Posted by mongrel View Post
    My other putter is a Ray Cook mallet. The M-1. Nice heavy small head in sort of a U-235 looking finish. I like the name because it reminds me of both one of my favorite rifles and a very good tank. And, best of all, my absolute favorite vehicle of either two or four wheels made by Bavarian Motor Works. I customized my Ray Cook M-1 with an Aldila graphite iron shaft cut to play 33". I filled the shaft with sand and stuck a black and white checked putter grip, pistol grip style, on the end with some lead weight at the butt end of the shaft. It is a short but heavy putter that has some nifty shaft flex. It is my pop-putter for when I feel the need to go Retro in my putting that day a la Bobby Locke and all the big pros who played in the '50's on those slow greens you see on the old TV black and white films of the Masters and Shell Wonderful World of Golf.
    In this age of concern over skin cancer, I'd be hesitant to game a putter called Ray Cook, even if I apply sunblock.
    GR lives...

  10. #10
    Join Date
    Jan 2008
    Location
    Burnham and Berrow
    Posts
    3,659
    Rep Power
    21
    FD

    I have a Ping DOC 17. Not a blade but a Ping never the less.

  11. #11
    Join Date
    Feb 2010
    Location
    The easiest
    Posts
    6,334
    Rep Power
    22
    Quote Originally Posted by lorenzoinoc View Post
    In this age of concern over skin cancer, I'd be hesitant to game a putter called Ray Cook, even if I apply sunblock.
    Old Ray can cook away but never wears a head cover. Unlike me, who always wears a hat.

  12. #12
    Join Date
    May 2005
    Location
    ChiselCreek
    Posts
    3,990
    Rep Power
    24
    Quote Originally Posted by 12sandwich View Post
    My Sophia came in yesterday. Gorgeous, great weighty feel, and a nice feel. I've just been able to putz around the house with it, but it feels so natural. My hopes are that I can control speed of the putts better on faster greens. I probably paid a bit much 70 delivered, buts it's a mint demo, without a sightline, hard to find like my Tracy II. After playing YES putters I can't stand a Cameron, or any putter that doesn't impart topspin. One of worst putters I used was a Brad Faxon Laguna 2.5 that would fly in there air a few inches and skid a few more, on any putt over 10' foot. I have a Ping Pal I think it's the 4 and the one Ky has, a ram Zebra. Gotta go my ol ladys horny.
    Yes, I have 3 Ram Zebra mallet putters, 2 at 33" and 1 at 32", stupid R&D mentality but I love the Ram Zebra 32" with Winn fat grip... so damn balanced, heavy enough,,, in fact I removed the head's foam insert and fill its cavity with heavy sand... LOVE the balance

  13. #13
    Join Date
    Dec 2001
    Location
    Spyglass
    Posts
    11,184
    Rep Power
    35
    Quote Originally Posted by edgey View Post
    FD

    I have a Ping DOC 17. Not a blade but a Ping never the less.
    Wow, what a big putter you have. I also recently procured a fine Ping putter from the Bay. It's a Ping JAS Craz-e Moment Putter, in brand new condition. I made 3 birdies over 15 feet. Women swoon when you play Ping.

  14. #14
    Join Date
    Dec 2001
    Location
    Spyglass
    Posts
    11,184
    Rep Power
    35
    Quote Originally Posted by Larryrsf View Post
    For a spash of realism, I suggest you and most here spend the money on lessons. Tell the pro you're ready for blades and that you serious think the type of irons you play will lower your average scores. I suspect the pro will say, "ok, I can help you decide which irons you need, but first, lets see your swing." We both know happens next. 30 minutes later you will NOT be thinking about clubs but about the MAJOR swing changes you need to make and scheduling your next lesson.

    http://www.youtube.com/watch?v=9YsvRfgLP3w

    Here Kevin (the pro you took a lesson from) hits an OLD 1-iron 250 yards to the end of the range.

    My message: "it is not the clubs!"

    Larry
    Larry, I just wanted to thank you for clarifying who Kevin was. In my old age I had forgotten that I spent an hour with him on the range about 2 months ago.

    Oh, and the thread is in regard to blade putters, not irons. The name of this website is GolfReview, so it probably stands to reason that we'd discuss golf clubs.

  15. #15
    Join Date
    Feb 2004
    Location
    Location, Location.
    Posts
    11,935
    Rep Power
    33
    Quote Originally Posted by mongrel View Post
    Old Ray can cook away but never wears a head cover. Unlike me, who always wears a hat.
    With or without a headcover, use of a Ray Cook will inevitably lead to a stroke.
    GR lives...

  16. #16
    Join Date
    Mar 2004
    Location
    Newcastle
    Posts
    11,981
    Rep Power
    33
    Quote Originally Posted by edgey View Post
    FD

    I have a Ping DOC 17. Not a blade but a Ping never the less.
    I had a DOC once, but I think mine may have been the 15. Really easy putter to get the ball rolling. Regret getting rid of it now.
    The views expressed by Not a Hacker are not meant to be understood by you primitive screw heads. Don't take it personally, just sit back and enjoy the writings of your better.

  17. #17
    Join Date
    Mar 2004
    Location
    Newcastle
    Posts
    11,981
    Rep Power
    33
    Quote Originally Posted by famousdavis View Post
    Larry, I just wanted to thank you for clarifying who Kevin was. In my old age I had forgotten that I spent an hour with him on the range about 2 months ago.

    Oh, and the thread is in regard to blade putters, not irons. The name of this website is GolfReview, so it probably stands to reason that we'd discuss golf clubs.
    You were just a mark for Larry and his golf lesson scam he's got going with Kevin. He probably gets so many pigeons he loses track of who he has scammed.
    The views expressed by Not a Hacker are not meant to be understood by you primitive screw heads. Don't take it personally, just sit back and enjoy the writings of your better.

  18. #18
    Join Date
    Feb 2010
    Location
    The easiest
    Posts
    6,334
    Rep Power
    22
    Quote Originally Posted by lorenzoinoc View Post
    With or without a headcover, use of a Ray Cook will inevitably lead to a stroke.
    And frequently just one stroke. Into the hole. No second putt. When Ray Cook speaks, Scotty Cameron cowers.

  19. #19
    Join Date
    Feb 2008
    Location
    Mystic Hills, Chesapeake Run, Swan Lake, Blackthorn
    Posts
    1,722
    Rep Power
    19
    Quote Originally Posted by Pky6471 View Post
    Yes, I have 3 Ram Zebra mallet putters, 2 at 33" and 1 at 32", stupid R&D mentality but I love the Ram Zebra 32" with Winn fat grip... so damn balanced, heavy enough,,, in fact I removed the head's foam insert and fill its cavity with heavy sand... LOVE the balance
    That's pretty cool how you can remove the bottom plate, I guess the foam insert is for noise, or adding weight by removing the foam.
    You could use it as a stash spot also. Coke, condoms, weed.
    Tm R9 420cc 9.5 Motore Tm R9 3 wood rip phenom, Titleist 909h 19* 24* voodoo, Scratch EZ-1 ds i80,steelfiber 3 or 4. 5-9 KBS, ds 47* jlm, pdg 53* ds 60* Odyssey Black 2 ball tour blade 33.5" Lethal

  20. #20
    Join Date
    May 2005
    Location
    ChiselCreek
    Posts
    3,990
    Rep Power
    24
    Quote Originally Posted by 12sandwich View Post
    That's pretty cool how you can remove the bottom plate, I guess the foam insert is for noise, or adding weight by removing the foam.
    You could use it as a stash spot also. Coke, condoms, weed.
    We don't need a rocket scientist to do this, just remove 4 small screws at the bottom, take out a foam insert, squeeze in as many as you could with used condoms... then you are on the way to improve your scores by 4 strokes (10 condoms for 1 stroke)
    Attached Images Attached Images  

  21. #21
    Join Date
    May 2005
    Location
    ChiselCreek
    Posts
    3,990
    Rep Power
    24
    http://www.ebay.com/ctg/Ram-Zebra-Pu...82#reviewDescr

    Seriously... if any of U are having problem with your putter, read the reviews on the bottom of above website and give it a try... I don't have 3 for no reasons... The first one I paid $55 over 15 yrs ago, 3-4 yrs ago Golf Galaxy opened a store in Wilmington DE and they have them on sales for $15/each brand new, so I bought two U guys can play better than me but I know I putt better than most of you guys

  22. #22
    Join Date
    Mar 2004
    Location
    Newcastle
    Posts
    11,981
    Rep Power
    33
    Quote Originally Posted by Pky6471 View Post
    http://www.ebay.com/ctg/Ram-Zebra-Pu...82#reviewDescr

    Seriously... if any of U are having problem with your putter, read the reviews on the bottom of above website and give it a try... I don't have 3 for no reasons... The first one I paid $55 over 15 yrs ago, 3-4 yrs ago Golf Galaxy opened a store in Wilmington DE and they have them on sales for $15/each brand new, so I bought two U guys can play better than me but I know I putt better than most of you guys
    I think it's only the old Zebras that are any good. I've hit newer models which didn't have the same feel and balance as the older ones. I certainly wish I could get my hands on an old Zebra. I made offers to a couple of guys at my old club who had them but none of them would part with them.
    The views expressed by Not a Hacker are not meant to be understood by you primitive screw heads. Don't take it personally, just sit back and enjoy the writings of your better.

  23. #23
    Join Date
    Jan 2008
    Location
    magnolia
    Posts
    2,040
    Rep Power
    20
    Found one in a local used sports store. Kind of beat up but it didn't feel too bad. Had the screws on the bottom to take the plate off. 14.95$
    Bridgestone J38 10.5, Srixon 2,3,4 hybrids. Snake Eyes Viper Tour
    Eidolon 52,56 and 60 wedges.
    Bettinardi sb-5+ putter.

  24. #24
    Join Date
    Jul 2008
    Location
    Kingswood
    Posts
    95
    Rep Power
    18
    FD

    I took your advice and went for the Ping Anser 5 and I really like it after moving away from my mallet. Have not 3 putted with it in 3 rounds so far which was a big problem with my old putter. Love the feel of the milled face and I am getting more and more comfortable with it each round I play. Obviously it is not what you are looking for but was wondering if you have tried one?

  25. #25
    Join Date
    Oct 2008
    Posts
    7,189
    Rep Power
    25
    I have a blade putter and a mallet putter. I am currently using the Taylormade Corza Ghost which is a mallet putter with the inline shaft. The thing that has improved my putting though has nothing to do with the style of putter, it has everything to do with making the change to a "left hand low" grip. It improved my putting last week by 50%. It forces me to be less "handsy" with the putt and to use the big muscles of my body to stroke the ball. As a result, I am putting the ball straighter and more smooth.
    Mizuno irons -- made by Hattori Hanzo, forged in the fires of Mt. Fujiyama.

  26. #26
    Join Date
    Dec 2001
    Location
    Spyglass
    Posts
    11,184
    Rep Power
    35
    Quote Originally Posted by Maggoo View Post
    FD

    I took your advice and went for the Ping Anser 5 and I really like it after moving away from my mallet. Have not 3 putted with it in 3 rounds so far which was a big problem with my old putter. Love the feel of the milled face and I am getting more and more comfortable with it each round I play. Obviously it is not what you are looking for but was wondering if you have tried one?
    Magoo, that's great to hear! You can't go wrong with Ping. I'm fairly certain I had recommended either the Ping Anser 2 or 3 and not the 5. In fact, I'm not certain what the 5 looks like. Does it have a longer hosel?

  27. #27
    Join Date
    Dec 2001
    Location
    Spyglass
    Posts
    11,184
    Rep Power
    35
    Quote Originally Posted by SoonerBS View Post
    I have a blade putter and a mallet putter. I am currently using the Taylormade Corza Ghost which is a mallet putter with the inline shaft. The thing that has improved my putting though has nothing to do with the style of putter, it has everything to do with making the change to a "left hand low" grip. It improved my putting last week by 50%. It forces me to be less "handsy" with the putt and to use the big muscles of my body to stroke the ball. As a result, I am putting the ball straighter and more smooth.
    When I say "blade putter" I mean the heel-shafted kind like Phil Mickelson used yesterday. Another way of putting it is "8802 style".

    Many of today's golf rags refer to a Ping Anser-style putter as a blade putter. I consider those to be heel-toe weighted putters and nothing close to a true blade putter.

  28. #28
    Join Date
    Feb 2010
    Location
    The easiest
    Posts
    6,334
    Rep Power
    22
    Quote Originally Posted by famousdavis View Post
    When I say "blade putter" I mean the heel-shafted kind like Phil Mickelson used yesterday. Another way of putting it is "8802 style".

    Many of today's golf rags refer to a Ping Anser-style putter as a blade putter. I consider those to be heel-toe weighted putters and nothing close to a true blade putter.
    You are correct. Basically a heel-shafted putter with a straight shaft. Corey Pavin won his first senior tour event yesterday down in Florida. Using his Bullseye putter. This is not a traditional blade putter but a center-shafted putter like the Schenectady putter that was banned for use long ago (maybe the 1930's) because it was center-shafted instead of heel-shafted and the guy who first played it beat the snot out of the Field and the Field was mightily pissed. I still have one of my father's old Bullseyes out in my shed but have not used it in years because the shaft is a little loose and rattles and the original leather grip is smooth as ice. Corey's victory has spurred me to get a new shaft and grip and I will likely fill the new shaft up with sand and maybe put another 50-100 grams of lead in the grip to make it my own Heavy Bullseye.
    Last edited by mongrel; 02-13-2012 at 10:05 AM. Reason: spell-fixx

  29. #29
    Join Date
    Oct 2008
    Posts
    7,189
    Rep Power
    25
    Quote Originally Posted by famousdavis View Post
    When I say "blade putter" I mean the heel-shafted kind like Phil Mickelson used yesterday. Another way of putting it is "8802 style".

    Many of today's golf rags refer to a Ping Anser-style putter as a blade putter. I consider those to be heel-toe weighted putters and nothing close to a true blade putter.
    Oh, . . . . . . . . those suck . . . . . . . . why are we discussing such inept putters?
    Mizuno irons -- made by Hattori Hanzo, forged in the fires of Mt. Fujiyama.

  30. #30
    Join Date
    Feb 2008
    Location
    Mystic Hills, Chesapeake Run, Swan Lake, Blackthorn
    Posts
    1,722
    Rep Power
    19
    Quote Originally Posted by SoonerBS View Post
    Oh, . . . . . . . . those suck . . . . . . . . why are we discussing such inept putters?
    People who have a putter stroke that's straight back, and straight through the target line they probably do suck.
    People who have a putter stroke that's inside the target line on the backstroke and inside on the follow through, they can be a better fit.
    Tm R9 420cc 9.5 Motore Tm R9 3 wood rip phenom, Titleist 909h 19* 24* voodoo, Scratch EZ-1 ds i80,steelfiber 3 or 4. 5-9 KBS, ds 47* jlm, pdg 53* ds 60* Odyssey Black 2 ball tour blade 33.5" Lethal

  31. #31
    Join Date
    Jul 2008
    Location
    Kingswood
    Posts
    95
    Rep Power
    18
    Quote Originally Posted by famousdavis View Post
    Magoo, that's great to hear! You can't go wrong with Ping. I'm fairly certain I had recommended either the Ping Anser 2 or 3 and not the 5. In fact, I'm not certain what the 5 looks like. Does it have a longer hosel?
    You suggested the 2 or 4. My stroke is very straight and after trying most of the Anser options I found the 5 suited my stroke the best. You are correct, it does have a longer hosel but it doesn't bother me at all. You should try one yourself.
    Last edited by Maggoo; 02-14-2012 at 01:28 AM.

  32. #32
    Join Date
    Jul 2008
    Location
    Kingswood
    Posts
    95
    Rep Power
    18
    Quote Originally Posted by 12sandwich View Post
    People who have a putter stroke that's straight back, and straight through the target line they probably do suck.
    People who have a putter stroke that's inside the target line on the backstroke and inside on the follow through, they can be a better fit.
    12

    How is the new Sophia going? Have you had a chance to test it out on the course?

  33. #33
    Join Date
    Feb 2008
    Location
    Mystic Hills, Chesapeake Run, Swan Lake, Blackthorn
    Posts
    1,722
    Rep Power
    19
    Quote Originally Posted by Maggoo View Post
    12

    How is the new Sophia going? Have you had a chance to test it out on the course?
    We still have snow on the ground here, though it's been a mild winter, and I've been able to hit quite a few balls in the backyard range as we've had some nice days.
    I'm taking a few days off, and heading south to play 2 days in a couple weeks.
    My typical miss is a pulled putt, long. My theory is it will work. Though there is not much room for error, as it's unforgiving.
    Tm R9 420cc 9.5 Motore Tm R9 3 wood rip phenom, Titleist 909h 19* 24* voodoo, Scratch EZ-1 ds i80,steelfiber 3 or 4. 5-9 KBS, ds 47* jlm, pdg 53* ds 60* Odyssey Black 2 ball tour blade 33.5" Lethal

  34. #34
    Join Date
    Oct 2008
    Posts
    7,189
    Rep Power
    25
    Quote Originally Posted by 12sandwich View Post
    We still have snow on the ground here, though it's been a mild winter, and I've been able to hit quite a few balls in the backyard range as we've had some nice days.
    I'm taking a few days off, and heading south to play 2 days in a couple weeks.
    My typical miss is a pulled putt, long. My theory is it will work. Though there is not much room for error, as it's unforgiving.
    The general consensus of this forum is that a fade is better than a draw on all clubs. I suggest you go to work at fading your putts.
    Mizuno irons -- made by Hattori Hanzo, forged in the fires of Mt. Fujiyama.

  35. #35
    Join Date
    Dec 2001
    Location
    Spyglass
    Posts
    11,184
    Rep Power
    35
    Quote Originally Posted by Maggoo View Post
    You suggested the 2 or 4. My stroke is very straight and after trying most of the Anser options I found the 5 suited my stroke the best. You are correct, it does have a longer hosel but it doesn't bother me at all. You should try one yourself.
    Mr. Maggoo, I am delighted to hear of your success with the Ping Anser 5 putter. Karsten designed the first Anser and if you have read the latest Golf Digest Clubtest you'll see that every recommended "blade" putter out there is an exact replica of the original anser.

    Myself, I tend to like the "anser" style putter as well but I do not like a long hosel. I recently procured a Ping JAS Craz-E putter off of Ebay and upon receipt I was disturbed upon my discovery of a dead mouse inside the headcover (not joking). Fortunately I discovered the mouse while golfing so it was easy to toss it aside and carry on. The smell lingered though.

    For whatever reason, I can't seem to putt well with a large mallet putter, especially the short ones.

  36. #36
    Join Date
    Oct 2008
    Posts
    7,189
    Rep Power
    25
    Quote Originally Posted by famousdavis View Post


    Mr. Maggoo, I am delighted to hear of your success with the Ping Anser 5 putter. Karsten designed the first Anser and if you have read the latest Golf Digest Clubtest you'll see that every recommended "blade" putter out there is an exact replica of the original anser.

    Myself, I tend to like the "anser" style putter as well but I do not like a long hosel. I recently procured a Ping JAS Craz-E putter off of Ebay and upon receipt I was disturbed upon my discovery of a dead mouse inside the headcover (not joking). Fortunately I discovered the mouse while golfing so it was easy to toss it aside and carry on. The smell lingered though.

    For whatever reason, I can't seem to putt well with a large mallet putter, especially the short ones.
    I can putt just fine with the Taylormad Corza Ghost mallet putter, but I had a PING JAS Craz-E putter that I bought off Fleabay a couple of years ago and putted one round with it. I then gave it away to my brother and told him to never bring it back within my sight again.
    Mizuno irons -- made by Hattori Hanzo, forged in the fires of Mt. Fujiyama.

  37. #37
    Join Date
    Dec 2001
    Location
    Spyglass
    Posts
    11,184
    Rep Power
    35
    Quote Originally Posted by SoonerBS View Post
    I can putt just fine with the Taylormad Corza Ghost mallet putter, but I had a PING JAS Craz-E putter that I bought off Fleabay a couple of years ago and putted one round with it. I then gave it away to my brother and told him to never bring it back within my sight again.
    It's not uncommon for average golfers to have no luck with Ping clubs. They are precision instruments that can only be used by the finest craftsmen, such as myself.

  38. #38
    Join Date
    Mar 2004
    Location
    Newcastle
    Posts
    11,981
    Rep Power
    33
    Quote Originally Posted by SoonerBS View Post
    The general consensus of this forum is that a fade is better than a draw on all clubs. I suggest you go to work at fading your putts.
    As silly as that sounds I once read Trevino talking about hitting his putts with a slight fade swing path which took missing left out of the equation. I've tried doing this in the past and I msut admit you get a sweet feeling when you sort of just slightly cut across the ball, and it goes pretty straight too.
    The views expressed by Not a Hacker are not meant to be understood by you primitive screw heads. Don't take it personally, just sit back and enjoy the writings of your better.

  39. #39
    Join Date
    Feb 2010
    Location
    The easiest
    Posts
    6,334
    Rep Power
    22
    Quote Originally Posted by Not a hacker View Post
    As silly as that sounds I once read Trevino talking about hitting his putts with a slight fade swing path which took missing left out of the equation. I've tried doing this in the past and I msut admit you get a sweet feeling when you sort of just slightly cut across the ball, and it goes pretty straight too.
    Trevino also had a method of ensuring a straight ball with driver off the tee. It was such a good tip that one of the golf magazines back in the mid-90's had him on the cover hitting driver with the title "Aim left, swing right, walk straight." The deal is you open your stance and aim left of your intended target line. You swing driver to the right of your intended target line. The mofo goes dead straight. Works like a charm. Anyway, a couple of years later I was in the gallery on a Friday morning at the first round of a Senior Tour event that used to be held outside Philly in Oxford, PA, and was sort of following Trevino overy few holes. He was playing with Thorpe and John Inman. Thorpe and Inman teed off and then Trevino gets his driver out of the bag and walks back to where we're standing behind a four foot high plywood board and looks me in the eye and I say "Aim left, swing right, and walk straight." And he gives me the finger and walks towards his teed ball, steps back towards us and takes his driver back with full swing force and the head hits the plywood like a rifle shot and me and the other guys jumped like four feet off the ground. He grinned and got up and aimed left, swung right and walked, with his caddie, straight down the middle.

  40. #40
    Join Date
    Dec 2001
    Location
    Spyglass
    Posts
    11,184
    Rep Power
    35
    Quote Originally Posted by Not a hacker View Post
    As silly as that sounds I once read Trevino talking about hitting his putts with a slight fade swing path which took missing left out of the equation. I've tried doing this in the past and I msut admit you get a sweet feeling when you sort of just slightly cut across the ball, and it goes pretty straight too.
    Something I tried the other day was addressing my putt and then using almost a pure wrist stroke where I would take my putting backswing simply by hinging my wrists and just barely moving my shoulders. The result was an extremely solid hit and very brief follow-thru. It felt like I was simply popping the ball toward the hole. I made putt after putt that way. That's the old way of putting because greens used to be furry, as did cooch.

  41. #41
    Join Date
    Oct 2008
    Posts
    7,189
    Rep Power
    25
    Quote Originally Posted by famousdavis View Post
    Something I tried the other day was addressing my putt and then using almost a pure wrist stroke where I would take my putting backswing simply by hinging my wrists and just barely moving my shoulders. The result was an extremely solid hit and very brief follow-thru. It felt like I was simply popping the ball toward the hole. I made putt after putt that way. That's the old way of putting because greens used to be furry, as did cooch.
    Still is in Oklahoma
    Mizuno irons -- made by Hattori Hanzo, forged in the fires of Mt. Fujiyama.

  42. #42
    Join Date
    Dec 2001
    Location
    Spyglass
    Posts
    11,184
    Rep Power
    35
    Quote Originally Posted by SoonerBS View Post
    Still is in Oklahoma
    I wasn't talking about livestock

  43. #43
    Join Date
    Dec 2005
    Location
    Jacks Point
    Posts
    10,195
    Rep Power
    30
    Quote Originally Posted by famousdavis View Post
    Something I tried the other day was addressing my putt and then using almost a pure wrist stroke where I would take my putting backswing simply by hinging my wrists and just barely moving my shoulders. The result was an extremely solid hit and very brief follow-thru. It felt like I was simply popping the ball toward the hole. I made putt after putt that way. That's the old way of putting because greens used to be furry, as did cooch.
    My Dad putts that way and is a pretty decent putter.

    Did you try it on a course during a round or just on the practice green? I've tried it on the practice green with decent results but wasn't game enough to try it during an actual round.
    I chose the road less traveled.

    Now where the f#ck am I?

  44. #44
    Join Date
    Jul 2008
    Location
    Kingswood
    Posts
    95
    Rep Power
    18
    Quote Originally Posted by 12sandwich View Post
    We still have snow on the ground here, though it's been a mild winter, and I've been able to hit quite a few balls in the backyard range as we've had some nice days.
    I'm taking a few days off, and heading south to play 2 days in a couple weeks.
    My typical miss is a pulled putt, long. My theory is it will work. Though there is not much room for error, as it's unforgiving.
    Let us know how you go, I hate to rub it in but it was a sunny 33 Deg C here today, very nice out on the course although the greens were a little hard.

  45. #45
    Join Date
    Jul 2008
    Location
    Kingswood
    Posts
    95
    Rep Power
    18
    Quote Originally Posted by SoonerBS View Post
    The general consensus of this forum is that a fade is better than a draw on all clubs. I suggest you go to work at fading your putts.
    Really? My natural shot on my woods and irons is a fade and I hate it. It kills me when I am a little off with my ball striking. Personally I would prefer a draw. Maybe I should try hitting a fade on my putts, although I don't really want to change anything with my putting. It is going very well since picking up the ping.

  46. #46
    Join Date
    Feb 2004
    Location
    Location, Location.
    Posts
    11,935
    Rep Power
    33
    Quote Originally Posted by Kiwi Player View Post
    My Dad putts that way and is a pretty decent putter.

    Did you try it on a course during a round or just on the practice green? I've tried it on the practice green with decent results but wasn't game enough to try it during an actual round.
    You continue to provide us with information not exactly putting your Dad in a favorable light. I'm disappointed by this. Just remember you're from his loins and the apple.....well, you know.
    GR lives...

  47. #47
    Join Date
    Feb 2008
    Location
    Mystic Hills, Chesapeake Run, Swan Lake, Blackthorn
    Posts
    1,722
    Rep Power
    19
    Quote Originally Posted by SoonerBS View Post
    The general consensus of this forum is that a fade is better than a draw on all clubs. I suggest you go to work at fading your putts.
    Sometimes I think the wind in Ok is having a reversion effect on you, like it must be blowing up your ass and out your mouth
    Have you ever learned to hit a draw?.
    Tm R9 420cc 9.5 Motore Tm R9 3 wood rip phenom, Titleist 909h 19* 24* voodoo, Scratch EZ-1 ds i80,steelfiber 3 or 4. 5-9 KBS, ds 47* jlm, pdg 53* ds 60* Odyssey Black 2 ball tour blade 33.5" Lethal

  48. #48
    Join Date
    Dec 2001
    Location
    Spyglass
    Posts
    11,184
    Rep Power
    35
    Quote Originally Posted by Kiwi Player View Post
    My Dad putts that way and is a pretty decent putter.

    Did you try it on a course during a round or just on the practice green? I've tried it on the practice green with decent results but wasn't game enough to try it during an actual round.
    I'm going to try it on the course the next time I go out. I know a guy who putts that way as well and he's one of the best putters I've seen. I think it's easiest to putt that way with a smaller-headed putter. I don't think that was correct English but you get my drift.

  49. #49
    Join Date
    Oct 2008
    Posts
    7,189
    Rep Power
    25
    Quote Originally Posted by famousdavis View Post
    I wasn't talking about livestock
    Me, either.
    Mizuno irons -- made by Hattori Hanzo, forged in the fires of Mt. Fujiyama.

  50. #50
    Join Date
    Oct 2008
    Posts
    7,189
    Rep Power
    25
    Quote Originally Posted by 12sandwich View Post
    Sometimes I think the wind in Ok is having a reversion effect on you, like it must be blowing up your ass and out your mouth
    Have you ever learned to hit a draw?.
    Actually, the Oklahoma wind is so strong that there is not a bodily orifice that is left unmolested.

    As far as me learning to hit a draw, I now hit nothing BUT a draw. I've never been one to run with general consensus.
    Mizuno irons -- made by Hattori Hanzo, forged in the fires of Mt. Fujiyama.

  51. #51
    Join Date
    Dec 2005
    Location
    Jacks Point
    Posts
    10,195
    Rep Power
    30
    Quote Originally Posted by famousdavis View Post
    I'm going to try it on the course the next time I go out. I know a guy who putts that way as well and he's one of the best putters I've seen. I think it's easiest to putt that way with a smaller-headed putter. I don't think that was correct English but you get my drift.
    More info about my Dad. He plays an old Ping Anser that you could never pry from his grasp.
    I chose the road less traveled.

    Now where the f#ck am I?

  52. #52
    Join Date
    Oct 2008
    Posts
    7,189
    Rep Power
    25
    Quote Originally Posted by Kiwi Player View Post
    More info about my Dad. He plays an old Ping Anser that you could never pry from his grasp.
    He obviously needed a bigger grip.
    Mizuno irons -- made by Hattori Hanzo, forged in the fires of Mt. Fujiyama.

  53. #53
    Join Date
    Feb 2004
    Location
    Location, Location.
    Posts
    11,935
    Rep Power
    33
    Quote Originally Posted by Kiwi Player View Post
    More info about my Dad. He plays an old Ping Anser that you could never pry from his grasp.
    Please stop. Your dad obviously has some redeeming qualities. After all, he did give you a silver spoon.
    GR lives...

  54. #54
    Join Date
    Feb 2008
    Location
    Mystic Hills, Chesapeake Run, Swan Lake, Blackthorn
    Posts
    1,722
    Rep Power
    19
    Quote Originally Posted by Maggoo View Post
    Let us know how you go, I hate to rub it in but it was a sunny 33 Deg C here today, very nice out on the course although the greens were a little hard.
    You had to rub it in. Will do, when I get a few rounds under my belt I'll relay my affair with the Sophia. Though the Tracy II is a fine putter. I just struggled on some very fast greens with it.
    Tm R9 420cc 9.5 Motore Tm R9 3 wood rip phenom, Titleist 909h 19* 24* voodoo, Scratch EZ-1 ds i80,steelfiber 3 or 4. 5-9 KBS, ds 47* jlm, pdg 53* ds 60* Odyssey Black 2 ball tour blade 33.5" Lethal

Thread Information

Users Browsing this Thread

There are currently 2 users browsing this thread. (0 members and 2 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •